5″ powered studio monitor with coaxial 1-inch textile-dome tweeter and 4-inch optimized-profile midrange driver.
Tri-amped design with integrated Class D power amplifier.
Ruler-flat frequency response—there’s nothing exaggerated about this speaker.
The product has a 6dB lower distortion level than its competitor and provides 20dB of headroom while playing at 85dB constantly.
₹ 85000
3-way powered desktop monitoring system with subwoofer and 2 satellite speakers
4.5-inch long-excursion woofers, 4-inch optimized-profile paper midrange driver, and 1-inch textile dome tweeters
Bi-amped design with integrated Class D power amp
Ruler-flat frequency response with negligible distortion
Boasts 20dB of headroom while playing continuously at 85dB
Coaxial design exhibits superb directivity — better than any non-coaxial design — covering your entire room uniformly
Boundary EQ enables you to tailor the speaker to any environment
LF/HF trims for fine-tuning the speaker’s response
Rotatable satellites for customizing your soundfield
Balanced TRS, 3.5mm, and optical inputs; USB-C input
₹ 64990₹ 72490
Kali Audio WS-6.2 is 1,000W powered subwoofer with dual horizontally opposed, 6.5-inch high excursion woofers.
Your mix’s low-frequency content is faithfully reproduced by the frequency response of 27 Hz to 200 Hz.
120 dB max SPL is loud enough for 5.1 arrays (5.1 systems need an additional processor and crossover).
The built-in limiter circuit safeguards against harmful voltage levels.
₹ 54990₹ 61990
Cardioid Large Diaphragm Dual Backplate Capsule for reducing background noise and exceptional off-axis rejection.
Nine Interchangeable Capsules System provides the recordist with a unique tonal characteristic and pickup pattern.
The B6 eschews these filters to maintain a purist approach preserving the authenticity of the recorded audio.
Gold-sputtered film for Enhanced Frequencies delivering a balanced and dynamic sound reproduction.
₹ 66799₹ 70315
3-band Harmonic EQ with 10dB boost/cut per band
Unique harmonic saturation types in each band (LO/HI shelf, MID peak)
Wireless OPTOSYNC linking for stereo operation
+/-20dB input/output gain controls and 41-position detented pots
Versatile for instruments, vocals, mixes, and masters.
₹ 55935₹ 56500
Active crossovers for precise frequency distribution.
Directivity Control Waveguide (DCW) technology for controlled dispersion.
Intelligent Signal Sensing (ISS) Technology and iso-Pod Stand for efficient power management and vibration isolation.
Laminar Integrated Port (LIP) Technology for improved bass response.
Optimized amplifiers for enhanced audio performance.
Protection circuitry to safeguard the speakers and maintain reliability.
₹ 489700₹ 495500
Smart Active Monitor (SAM) Systems
14″ (front) and 12″ (rear) bass drivers
Optimized amplifiers, 400W per driver
Active crossovers; protection circuitry
Intelligent Signal Sensing (ISS) Technology
₹ 1129260₹ 1140576
Dual 10.4″ Acoustically Concealed Woofers for extended bass response.
Minimum Diffraction Coaxial Driver accepts Analog or AES/EBU Signal for versatile connectivity.
Outputs AES/EBU Signal for seamless linking with other devices.
Minimum Diffraction Coaxial (MDC) driver ensures exceptional imaging quality.
Maximized Directivity Control Waveguide (MaxDCW) technology for enhanced dimensional imaging.
₹ 606520₹ 620578
16 x 16 I/O on balanced TRS
Front-panel stereo TRS Headphone jack
2 x 4 ADAT TOSlink optical ports
SFP port for optional expansion module
Optional Optical MADI I/O upgrade (SFP module available separately)
₹ 160700
Seamless Dante Network Integration: Connect via 2 x RJ-45 Ethernet connectors using CAT5/6 cables.
Built-In Brooklyn II Board: 64 x 64 channel capacity for Dante audio.
Intuitive Control: 4 x TFT screens provide complete control over analog I/O levels and unit settings.
High-Performance DSP: Equipped with powerful DSP for optimal audio performance and processing.
MIDI I/O: Offers MIDI over MADI and remote control capabilities.
Plug and Play: Easily integrates into Dante networks for hassle-free setup and configuration.
₹ 280243
1,000W of power with a 12″ driver for impactful bass.
23Hz–160Hz frequency response for accurate low-frequency reproduction.
Compact size fits conveniently under desks and in small cars.
Sturdy 18mm plywood enclosure with roadworthy side handles.
Low-noise port tube design delivers clean and punchy bass without chuffing.
₹ 85490₹ 94990
8″ coaxial studio monitor with 1″ textile-dome tweeter and 4″ optimized-profile midrange driver.
Tri-amped design featuring an integrated Class D power amp.
Maintains ruler-flat frequency response without artificial enhancements.
Exceptionally low distortion levels, 6dB less than nearest competitor.
Offers 20dB of headroom for continuous playback at 85dB.
Large magnets and voice coils for precise low-end response and extended low frequencies.
₹ 89990₹ 99990
Sliding drawer accommodates 61-key controllers
2 x 4-space rack bays for your interface, converters, preamps, and processors
Rear cable tray reduces clutter
Adds a high-class look to your studio
₹ 73470₹ 74470
All-passive circuitry for natural tone sculpting.
Unique Shelf curves using the “bandwidth” control.
Overlapping and interleaved frequency choices for precise shaping.
Each band switchable between shelf and bell modes.
Vacuum tube makeup gain and line drivers for warmth and clarity.
₹ 674842₹ 710360
SLAM means stereo limiter and microphone preamplifier
FET Limiters, Stereo Link, and VU Metering
No mic preamps or instrument inputs. Instead the tube sections are paralleled for lower noise and distortion
All pots are replaced with rotary switches for detented resettability and easier calibration
The mastering version has a true hard-wire bypass function, which is not possible on the regular version with mic preamps, etc. What was the Left Bypass, becomes the full Bypass (in stereo and hardwired). No separate L & R bypass buttons
Call for Price
Rotary switches with detented steps for precise channel matching and settings recall.
Switch steps constructed using 1% metal film resistors on sealed gold-contact Grayhill switches.
Manley input and output transformers featuring pure nickel laminations in mu-metal cases.
Flat frequency response spanning from 20Hz to 25kHz.
Balanced inputs and outputs for minimized noise and interference.
₹ 587404₹ 618320
BURL custom BX3 input transformer
BURL custom BX4 iron output transformer
Audiophile, discrete, Class A, direct-coupled, capacitor free circuit path
Stepped gain control
Independent output level control
70 dB gain
Impedance select
1/4” front panel DI input
30 dB pad for hot signals and balanced line level input
Call for Price
Transformerless Class A microphone with distinctive sound.
Includes B8 large-diaphragm cardioid condenser Bottle Cap FET.
B8 capsule is a modified version of a legendary condenser capsule.
Comes with spider mount and protective flight case.
Captures detailed sound from vocals, guitars, and drums.
Versatile microphone with interchangeable capsules.
₹ 93628₹ 98556
Bluebird SL is an ideal choice for nice crisp results from saxophones and wind instruments.
Highpass filter reduces mud and rumble and -20dB pad tackles loud sources.
Large-diaphragm Cardioid Condenser Microphone with modern sonic signature
Includes shockmount and protective wood box
High output and detailed frequency response captures delicate sources beautifully
₹ 31061₹ 32696
Classic sonic signature that flatters an array of voices and instruments
High output with richly detailed frequency response
High-pass filter and -20dB pad for ultimate versatility
₹ 41351₹ 43527