Classic vintage charm from the original Pultecs with the assurance of modern engineering.
Achieving a pristine and pure sound with an exceptionally low noise floor.
Effortlessly recall settings using the user-friendly 21-position stepped switches.
Unleash the full potential of guitars, vocals, woodwinds, and other midrange-rich elements with this outstanding EQ.
Discover new realms of creativity through the versatility of separate boost and cut bands.
Call for Price
FET compressor with Zener and Germanium diode knee curve options
Input control for signal level adjustment
Gain make-up control for post-compression volume adjustment
Attack control and 3-position ratio selection
Sidechain filter for precise compression triggering
₹ 124431₹ 130980
Vertical 2-way system with 8″ polypropylene woofer and U-ART tweeter.
U-ART accelerated-ribbon tweeter with precision HPS waveguide.
Large rear-firing bass reflex port.
Highly efficient 90W Class D bi-amplification.
Linear frequency response of 36Hz–25kHz.
₹ 38500₹ 45000
U-ART 1.9″ Accelerated Ribbon Tweeter with HPS Waveguide for precise high-frequency reproduction.
7″ Polypropylene woofer and rear-firing bass-reflex port for extended bass response.
Cumulated Amp. Power RMS of 70W for ample power and clarity.
Wide Frequency Response: 39 Hz – 25 kHz for accurate sound reproduction.
Max. SPL Per Pair at 1 m: ≥110 dB for loud and clear monitoring.
₹ 29800₹ 35400
U-ART 1.9” Accelerated Ribbon Tweeter with HPS Waveguide
5” Polypropylene Woofer and Rear-Firing Bass-Reflex Port
Cumulated Amplifier Power RMS: 70W
Wide Frequency Response: 45 Hz – 25 kHz
Impressive SPLs of up to 106 dB per pair
₹ 26000₹ 30400
All-passive circuitry for natural tone sculpting.
Unique Shelf curves using the “bandwidth” control.
Overlapping and interleaved frequency choices for precise shaping.
Each band switchable between shelf and bell modes.
Vacuum tube makeup gain and line drivers for warmth and clarity.
₹ 674842₹ 710360
SLAM means stereo limiter and microphone preamplifier
FET Limiters, Stereo Link, and VU Metering
No mic preamps or instrument inputs. Instead the tube sections are paralleled for lower noise and distortion
All pots are replaced with rotary switches for detented resettability and easier calibration
The mastering version has a true hard-wire bypass function, which is not possible on the regular version with mic preamps, etc. What was the Left Bypass, becomes the full Bypass (in stereo and hardwired). No separate L & R bypass buttons
Call for Price
Vintage-inspired EQ for 500 Series rack
English-style console EQ design
Treble and bass shelf: +/- 18dB
Treble at 12k, bass selectable 50Hz-110Hz
Hi- and Lo-mid: +/-18dB, 7-selection “Q” switch
₹ 145730₹ 153400
30Hz, 40Hz, 70Hz, 100Hz shelf boost, 0–13.5dB
30Hz, 40Hz, 70Hz, 100Hz shelf attenuate, 0–17.5dB
1kHz, 2kHz, 3kHz, 4kHz, 5kHz, 8kHz, 10kHz, 12kHz, 16kHz peak boost, 0–18dB
5kHz, 10kHz shelf boost, 0–14dB
5kHz, 10kHz, 20kHz shelf attenuate, 0–16dB
Amplifier: 20Hz–20kHz; +0, -1dB (ref: 1kHz, including input/output transformers)
Input transformer: 600 ohms
Output transformer: 600 ohms
₹ 111729
30Hz, 40Hz, 70Hz, 100Hz shelf boost, 0–13.5dB
30Hz, 40Hz, 70Hz, 100Hz shelf attenuate, 0–17.5dB
1kHz, 2kHz, 3kHz, 4kHz, 5kHz, 8kHz, 10kHz, 12kHz, 16kHz peak boost, 0–18dB
5kHz, 10kHz shelf boost, 0–14dB
5kHz, 10kHz, 20kHz shelf attenuate, 0–16dB
Amplifier: 20Hz–20kHz; +0, -1dB (ref: 1kHz, including input/output transformers)
Input transformer: 600 ohms
Output transformer: 600 ohms
Call for Price
Rotary switches with detented steps for precise channel matching and settings recall.
Switch steps constructed using 1% metal film resistors on sealed gold-contact Grayhill switches.
Manley input and output transformers featuring pure nickel laminations in mu-metal cases.
Flat frequency response spanning from 20Hz to 25kHz.
Balanced inputs and outputs for minimized noise and interference.
₹ 587404₹ 618320
Topology based closely on the original EMI TG12428 at EMI/Abbey Road studio
Discrete transformer-balanced amplifiers produce a warm tone with clear highs and rich lows
48V phantom power, phase reverse, and an impedance switch
Impedance switch toggles between 300 ohms and 1200 ohms, to match any mic
Channel output gain control lets you run the input gain hot for extra color
₹ 112100₹ 118000
Three Triodes for Rich Tube Sound.
Class-A Circuit for Exceptional Audio Quality.
Precise Frequency Response: 20 – 20,000 Hz +/- 1.5dB.
Stepped Potentiometers for Accurate Settings.
Transformer Balanced Inputs and Output.
Internal Power Supply with Toroidal Transformer.
Compact Design: Height 132mm (3U), Width 483mm, Depth 250mm.
₹ 241940₹ 244385
Stereo or Dual Mono Operation for Flexible Audio Processing
Class-A Circuit Design for Premium Sound Quality
All-Tube Signal Path for Warm and Vintage Tones
Stepped Potentiometers for Precise and Repeatable Adjustments
Transformer Balanced XLR Inputs and Outputs for Professional Connectivity
Wide Frequency Response of 20Hz – 40,000Hz with +/- 1.5dB Accuracy
High Dynamic Range of >110dB Un-weighted for Clear and Detailed Audio
₹ 241940₹ 244385
Inspired by EMI TG12413 compressor in historic TG12345 consoles.
Selectable sharp and rounded knees for aggressive or subtle compression.
Continuous controls: input, attack, release, and output (makeup gain).
Vintage styling with VU meter.
True bypass for signal comparison.
₹ 141246₹ 148680
Emulates the sonic character of the Fairchild 660 and Altec 436/RS124 classics.
COMP 1: 2:1 ratio with slow time constants akin to Altec 436/RS124.
Limit mode: Fast response, echoing the legendary Fairchild 660 curves.
COMP 2: Hybrid setting between COMP 1 and Limit modes.
Flexibility with switchable input impedance for varied driving.
₹ 553774₹ 582920
Vintage-inspired classic EQ with modern functionality.
Blend of vintage warmth and contemporary features.
51 EQ points across 2 channels for detailed sound shaping.
Multiply switch for up to 13.5dB boost/cut.
High pass and low pass filters, bell/shelf selections on high and low bands.
₹ 653543₹ 687940