SLAM means stereo limiter and microphone preamplifier
FET Limiters, Stereo Link, and VU Metering
No mic preamps or instrument inputs. Instead the tube sections are paralleled for lower noise and distortion
All pots are replaced with rotary switches for detented resettability and easier calibration
The mastering version has a true hard-wire bypass function, which is not possible on the regular version with mic preamps, etc. What was the Left Bypass, becomes the full Bypass (in stereo and hardwired). No separate L & R bypass buttons
Call for Price
16 x 16 I/O on balanced TRS
Front-panel stereo TRS Headphone jack
2 x 4 ADAT TOSlink optical ports
SFP port for optional expansion module
Optional Optical MADI I/O upgrade (SFP module available separately)
₹ 160700
Seamless Dante Network Integration: Connect via 2 x RJ-45 Ethernet connectors using CAT5/6 cables.
Built-In Brooklyn II Board: 64 x 64 channel capacity for Dante audio.
Intuitive Control: 4 x TFT screens provide complete control over analog I/O levels and unit settings.
High-Performance DSP: Equipped with powerful DSP for optimal audio performance and processing.
MIDI I/O: Offers MIDI over MADI and remote control capabilities.
Plug and Play: Easily integrates into Dante networks for hassle-free setup and configuration.
₹ 280243
Rotary switches with detented steps for precise channel matching and settings recall.
Switch steps constructed using 1% metal film resistors on sealed gold-contact Grayhill switches.
Manley input and output transformers featuring pure nickel laminations in mu-metal cases.
Flat frequency response spanning from 20Hz to 25kHz.
Balanced inputs and outputs for minimized noise and interference.
₹ 587404₹ 618320
All-passive circuitry for natural tone sculpting.
Unique Shelf curves using the “bandwidth” control.
Overlapping and interleaved frequency choices for precise shaping.
Each band switchable between shelf and bell modes.
Vacuum tube makeup gain and line drivers for warmth and clarity.
₹ 674842₹ 710360
Vintage-inspired classic EQ with modern functionality.
Blend of vintage warmth and contemporary features.
51 EQ points across 2 channels for detailed sound shaping.
Multiply switch for up to 13.5dB boost/cut.
High pass and low pass filters, bell/shelf selections on high and low bands.
₹ 653543₹ 687940
Emulates the sonic character of the Fairchild 660 and Altec 436/RS124 classics.
COMP 1: 2:1 ratio with slow time constants akin to Altec 436/RS124.
Limit mode: Fast response, echoing the legendary Fairchild 660 curves.
COMP 2: Hybrid setting between COMP 1 and Limit modes.
Flexibility with switchable input impedance for varied driving.
₹ 553774₹ 582920
Classic vintage charm from the original Pultecs with the assurance of modern engineering.
Achieving a pristine and pure sound with an exceptionally low noise floor.
Effortlessly recall settings using the user-friendly 21-position stepped switches.
Unleash the full potential of guitars, vocals, woodwinds, and other midrange-rich elements with this outstanding EQ.
Discover new realms of creativity through the versatility of separate boost and cut bands.
Call for Price
Vintage-inspired EQ for 500 Series rack
English-style console EQ design
Treble and bass shelf: +/- 18dB
Treble at 12k, bass selectable 50Hz-110Hz
Hi- and Lo-mid: +/-18dB, 7-selection “Q” switch
₹ 145730₹ 153400
30Hz, 40Hz, 70Hz, 100Hz shelf boost, 0–13.5dB
30Hz, 40Hz, 70Hz, 100Hz shelf attenuate, 0–17.5dB
1kHz, 2kHz, 3kHz, 4kHz, 5kHz, 8kHz, 10kHz, 12kHz, 16kHz peak boost, 0–18dB
5kHz, 10kHz shelf boost, 0–14dB
5kHz, 10kHz, 20kHz shelf attenuate, 0–16dB
Amplifier: 20Hz–20kHz; +0, -1dB (ref: 1kHz, including input/output transformers)
Input transformer: 600 ohms
Output transformer: 600 ohms
₹ 111729
30Hz, 40Hz, 70Hz, 100Hz shelf boost, 0–13.5dB
30Hz, 40Hz, 70Hz, 100Hz shelf attenuate, 0–17.5dB
1kHz, 2kHz, 3kHz, 4kHz, 5kHz, 8kHz, 10kHz, 12kHz, 16kHz peak boost, 0–18dB
5kHz, 10kHz shelf boost, 0–14dB
5kHz, 10kHz, 20kHz shelf attenuate, 0–16dB
Amplifier: 20Hz–20kHz; +0, -1dB (ref: 1kHz, including input/output transformers)
Input transformer: 600 ohms
Output transformer: 600 ohms
Call for Price
FET compressor with Zener and Germanium diode knee curve options
Input control for signal level adjustment
Gain make-up control for post-compression volume adjustment
Attack control and 3-position ratio selection
Sidechain filter for precise compression triggering
₹ 124431₹ 130980
Inspired by EMI TG12413 compressor in historic TG12345 consoles.
Selectable sharp and rounded knees for aggressive or subtle compression.
Continuous controls: input, attack, release, and output (makeup gain).
Vintage styling with VU meter.
True bypass for signal comparison.
₹ 141246₹ 148680
BURL custom BX3 input transformer
BURL custom BX4 iron output transformer
Audiophile, discrete, Class A, direct-coupled, capacitor free circuit path
Stepped gain control
Independent output level control
70 dB gain
Impedance select
1/4” front panel DI input
30 dB pad for hot signals and balanced line level input
Call for Price
Topology based closely on the original EMI TG12428 at EMI/Abbey Road studio
Discrete transformer-balanced amplifiers produce a warm tone with clear highs and rich lows
48V phantom power, phase reverse, and an impedance switch
Impedance switch toggles between 300 ohms and 1200 ohms, to match any mic
Channel output gain control lets you run the input gain hot for extra color
₹ 112100₹ 118000
Five selectable polar patterns: figure-8, supercardioid, cardioid, omnidirectional, and custom.
Microprocessor-controlled polarization voltages for precision.
Analog highpass filters: Choose from 40Hz, 80Hz, and 160Hz.
10dB and 20dB analog pads for handling high-volume sources.
Dual outputs for independent recording of each diaphragm.
₹ 107682₹ 113350
Matched pair of large-diaphragm condenser microphones.
Cardioid polar pattern for focused sound capture.
Handmade 1″ ceramic capsule for precise audio reproduction.
Selectable pad at -10 or -20 dB for handling high sound pressure.
₹ 67849₹ 71420
USB class-compliant MIDI interface for flexible MIDI connections.
Four MIDI ports configurable as 1-in / 3-out, 2-in / 2-out, or 4-out setup.
Automatic MIDI connection detection simplifies setup.
Includes Bitwig 8-Track Software Card for music production.
Expandable via additional MIDIFLEX4 units for more ports.
Built-in indicators for easy monitoring of ports and power status.
₹ 7990₹ 8800
61-note synth-action keyboard with velocity and aftertouch.
9 faders, 8 assignable encoders & LED buttons, 4 navigation buttons, 6 LED transport buttons, and more.
128 x 64 px LCD Display and USB bus powered.
8 velocity & pressure-sensitive LED color pads, load or save to any 8 pad maps.
MIDI assignable 1/4″ TS foot switch and Expression pedal inputs.
Includes Bitwig 8-Track DAW.
₹ 33990₹ 37600
49-note 2nd Gen synth-action keyboard with velocity and aftertouch sensitivity.
Offers 4 velocity curves and 1 adjustable fixed velocity setting.
Equipped with pitch bend and modulation wheels for expressive control.
Octave shift buttons for extending the playable range of the keyboard.
₹ 27990₹ 31200