5-Band Fully Parametric EQ
Stepped Knobs for Recall, Rack-Mountable
Dual-Mono or Stereo Operation
120V Rail Technology, Mastering Grade
Proportional or Constant Q, Auto-Bypass Mode
₹ 655830₹ 662450
Vintage-inspired classic EQ with modern functionality.
Blend of vintage warmth and contemporary features.
51 EQ points across 2 channels for detailed sound shaping.
Multiply switch for up to 13.5dB boost/cut.
High pass and low pass filters, bell/shelf selections on high and low bands.
₹ 653543₹ 687940
Tube compressor/limiter with stereo and dual-mono modes.
All controls are switches or detented knobs for easy repeatability.
High 120-volt operating voltage for ample headroom and ultra-low noise.
Achieve transparent to sonically colored compression.
Internal control signal limiting delivers musical, lively sound.
₹ 587200₹ 593135
Dual-channel mastering console in a compact 3U form factor.
Utilizes 120V DC Audio Rail technology with 5th generation SUPRA Op Amps.
Equipped with 4 stereo inputs and 4 stereo source inputs.
Provides 2 stereo recording outputs for versatile routing.
Offers 3 stereo and 2 mono speaker outputs for flexible monitoring.
₹ 557790₹ 563430
Emulates the sonic character of the Fairchild 660 and Altec 436/RS124 classics.
COMP 1: 2:1 ratio with slow time constants akin to Altec 436/RS124.
Limit mode: Fast response, echoing the legendary Fairchild 660 curves.
COMP 2: Hybrid setting between COMP 1 and Limit modes.
Flexibility with switchable input impedance for varied driving.
₹ 553774₹ 582920
Vintage-inspired EQ for 500 Series rack
English-style console EQ design
Treble and bass shelf: +/- 18dB
Treble at 12k, bass selectable 50Hz-110Hz
Hi- and Lo-mid: +/-18dB, 7-selection “Q” switch
₹ 145730₹ 153400
Inspired by EMI TG12413 compressor in historic TG12345 consoles.
Selectable sharp and rounded knees for aggressive or subtle compression.
Continuous controls: input, attack, release, and output (makeup gain).
Vintage styling with VU meter.
True bypass for signal comparison.
₹ 141246₹ 148680
A Monitor Controller with Talkback, Headphone Amplifier, and Phonitor Matrix
Superb talkback setup featuring an integrated condenser microphone
Three monitoring modes: LR Swap, Stereo, and Reverse Phase
When using headphones, Phonitor Matrix replicates speaker-like spatial effects.
You can connect a single full-range mono monitor speaker to the subwoofer’s output.
₹ 127430₹ 128725
FET compressor with Zener and Germanium diode knee curve options
Input control for signal level adjustment
Gain make-up control for post-compression volume adjustment
Attack control and 3-position ratio selection
Sidechain filter for precise compression triggering
₹ 124431₹ 130980
Topology based closely on the original EMI TG12428 at EMI/Abbey Road studio
Discrete transformer-balanced amplifiers produce a warm tone with clear highs and rich lows
48V phantom power, phase reverse, and an impedance switch
Impedance switch toggles between 300 ohms and 1200 ohms, to match any mic
Channel output gain control lets you run the input gain hot for extra color
₹ 112100₹ 118000
Stereo or surround sound monitor controller
Transparent, flawless sound quality provides you with an accurate picture of your mix.
Numerous I/O choices support a broad variety of applications.
You may get the entire dynamic range at any volume level with analogue volume control.
Perfect for sound design, music production, and post-production
₹ 88228₹ 89120
Excellent active circuitry produces flawless sound quality.
Use the same monitor controller to operate headphones and speakers
Dual headphone amplifiers enable simultaneous monitoring by two people.
Headphone monitoring is highly precise with crossfeed control.
High-quality balancing stages do not require a direct box.
You may connect either business or personal devices thanks to the adjustable input sensitivity.
You can connect a single mono speaker or subwoofer using the separate mono speaker output.
Switches for the source, speaker, mono, and dim
₹ 71562₹ 72285
Discrete mic/line/hi-z preamp with award-winning Camden topology.
Exceptional audio performance with near-theoretical limits of noise, distortion, and phase/frequency linearity at all gains.
48V orange LED indicates voltage status for microphone protection.
₹ 60395₹ 61005
61-note weighted (semi-) velocity-sensitive keyboard with aftertouch.
Dedicated hardware control for Bitwig Studio, Logic Pro X, Reason, Cubase, FL Studio, Reaper, or Nuendo.
16 encoders, 9 faders, 10 assignable LED buttons, and 11 dedicated transport buttons.
11 transport/F-key buttons and 22 navigation buttons.
100mm ALPS motorized fader for precise control.
3.5” high-resolution TFT display for real-time control and feedback.
Sophisticated mapping for popular VST plug-ins and Reason’s instruments and rack extensions.
₹ 55990₹ 62300
3-band Harmonic EQ with 10dB boost/cut per band
Unique harmonic saturation types in each band (LO/HI shelf, MID peak)
Wireless OPTOSYNC linking for stereo operation
+/-20dB input/output gain controls and 41-position detented pots
Versatile for instruments, vocals, mixes, and masters.
₹ 55935₹ 56500
49-note weighted (semi-) velocity-sensitive keyboard with aftertouch.
Dedicated hardware controller for Bitwig Studio, Logic Pro X, Reason, Cubase, FL Studio, Reaper, or Nuendo.
16 encoders, 9 faders, 10 assignable LED buttons, and 11 dedicated transport buttons.
11 transport/F-key buttons and 22 navigation buttons for comprehensive control.
100mm ALPS motorized fader for pro-console mixer control.
3.5” high-resolution TFT display for real-time control and function display.
Sophisticated mapping for popular VST plug-ins and Reason’s instruments and rack extensions.
₹ 46990₹ 52100
61-note synth-action keyboard with velocity and aftertouch.
9 faders, 8 assignable encoders & LED buttons, 4 navigation buttons, 6 LED transport buttons, and more.
128 x 64 px LCD Display and USB bus powered.
8 velocity & pressure-sensitive LED color pads, load or save to any 8 pad maps.
MIDI assignable 1/4″ TS foot switch and Expression pedal inputs.
Includes Bitwig 8-Track DAW.
₹ 33990₹ 37600
USB MIDI controller and step sequencer for hardware and software
16 sensitive RGB pads, with powerful Pad Repeat function for creating dynamic rolls
Hardware step sequencer gives you instant access to 16 patterns, up to four parts each, for a total of 64 steps
Deep integration for popular DAWs including Ableton Live Suite, Bitwig, Cubase, Logic, Garageband, Studio One, and more
Can control an entire MIDI-based rig, complete with internal clock and customizable control assignments
Nektarine software hosts up to 16 virtual instruments (VST, VST3, and AU) plus effects plug-ins
Use Nektarine as a plug-in itself within your DAW (AAX, AU, VST, VST3), or as a standalone host for your instruments and effects
Comprehensive browser makes it simple to find your favorite sounds and custom control maps
Dedicated buttons to enable DAW control, step sequencer, note repeat, and other modes support a fast workflow
₹ 32990₹ 36600