True Neve 88RS mic preamp in a 500-series format, with transformer-coupled Mic input, electronically balanced Line and DI inputs and Line output
REGeneration feature allows Line and DI inputs to be fed through the Mic input transformer to inject the legendary Neve sound
Sweepable high pass filter can be switched in or out
Intelligent 48v phantom power function
-20dB pad and phase reversal features for Mic, Line & DI inputs
Signal Presence LED illuminates green from a level of -25dB and red from a level of +26dB Front combi-XLR connector for Mic input (XLR) and Line & DI inputs (1/4” TRS jack – LIFT switch eliminates potential ground loops when using unbalanced jack connectors in the front input
Compatible 500-series rack/enclosure with Power Supply and line-level input/output connectors required, not supplied.
Call for Price
BURL custom BX3 input transformer
BURL custom BX4 iron output transformer
Audiophile, discrete, Class A, direct-coupled, capacitor free circuit path
Stepped gain control
Independent output level control
70 dB gain
Impedance select
1/4” front panel DI input
30 dB pad for hot signals and balanced line level input
Call for Price
Full session recall and support for DAW automation when loaded in an NG500-compatible chassis like TITAN, or via USB connection
3 touch-sensitive encoders (Threshold, Mix, Make Up) allow you to draw automation into your DAW
True bypass completely removes the circuit from your signal path.
Switchable side chain filters for fine-tuning how the compressor reacts to bass frequencies
Call for Price
High-performance 32-bit DSP processing and 24-bit, 48KHz sampling
Over 100dB dynamic range with +22dBu headroom
Adjustable input and output levels for optimal signal to noise performance
Low power consumption for cool running
Independent control of each program’s reverberant parameters
Nudge Buttons for easy data adjustment
Alphanumeric program descriptions for effortless memory management
New rotary push encoder for intuitive parameter adjustments by ear.
Call for Price
Handbuilt, hand-wired multichannel analog compressor for 5.1 surround applications
Eminent sound quality with 6 transformer-balanced audio paths, electronically balanced outputs, and post-output transformers
Flexible sidechain routing and filtering are ideal for broadcast and mastering applications
Threshold, Ratio, Attack, Recovery
Call for Price
Topology based closely on the original EMI TG12428 at EMI/Abbey Road studio
Discrete transformer-balanced amplifiers produce a warm tone with clear highs and rich lows
48V phantom power, phase reverse, and an impedance switch
Impedance switch toggles between 300 ohms and 1200 ohms, to match any mic
Channel output gain control lets you run the input gain hot for extra color
₹ 112100₹ 118000
Classic transformer microphone preamp amp (Class A design)
Neve-designed, hand-wound transformers
Both Mic and Line inputs are transformer balanced and earth free
Gain knob with Signal Presence LED
+5/-20dB level Trim control with integrated phantom power on/off switch
Phase, impedance and front input selector switches
Microphone Input: Gain -80db to -20dB in 5dB steps
Line Input: Input impedance 4k ohms bridging, gain -20dB to +10dB in 5dB steps
Output is transformer balanced and earth free
Distortion: Not more than 0.07% from 50Hz to 10kHz at +20dBu output (80kHz bandwidth)
Freq Response: ±0.5dB 20Hz to 20kHz, -3dB at 40kHz
Crafted in England by Neve engineers
₹ 119500
FET compressor with Zener and Germanium diode knee curve options
Input control for signal level adjustment
Gain make-up control for post-compression volume adjustment
Attack control and 3-position ratio selection
Sidechain filter for precise compression triggering
₹ 124431₹ 130980
Large-format 88RS console preamp.
Legendary Neve color for all inputs.
“Big iron” circuit paths balanced with Marinair transformers.
Reference-grade AD/DA conversion.
Superior instrument audio quality from Neve DI circuits.
₹ 125000
Type: Mono Limiter/Compressor Module
Format: 500 Series (Compatible with most 500 Series chassis)
Construction: Handcrafted in England by Neve engineers
Sound Character: Retains the original 2264A’s unique sonic characteristics with the same architecture, matching components, and original hand-wound transformers
Circuit Design: Diode-bridge limiter/compressor with high-headroom Class A/B design
₹ 133750
Inspired by EMI TG12413 compressor in historic TG12345 consoles.
Selectable sharp and rounded knees for aggressive or subtle compression.
Continuous controls: input, attack, release, and output (makeup gain).
Vintage styling with VU meter.
True bypass for signal comparison.
₹ 141246₹ 148680
Vintage-inspired EQ for 500 Series rack
English-style console EQ design
Treble and bass shelf: +/- 18dB
Treble at 12k, bass selectable 50Hz-110Hz
Hi- and Lo-mid: +/-18dB, 7-selection “Q” switch
₹ 145730₹ 153400
Not standalone — requires compatible 500 Series chassis/power supply
ng500 compatible with full support for WesAudio’s _TITAN Recall Chassis
Fully analog stereo/dual-mono/mid–side 4-band analog EQ with highpass filter and digital recall
Innovative analog circuit control eliminates glitches and artifacts due to pot movement
Because knob movement causes no noise, full automation is feasible without side effects
₹ 151500
Requires compatible 500 Series chassis/power supply (not standalone).
ng500 compatible with full support for WesAudio’s _TITAN Recall Chassis.
Passive stereo/dual-mono/mid–side 2-band analog EQ.
6 touch-sensitive encoders allow for automation of each parameter.
Innovative analog circuit control eliminates glitches and artifacts due to pot movement.
Knob movement is noiseless, allowing for full automation without side effects.
₹ 152500
Full session recall and support for DAW automation when loaded in an NG500-compatible chassis like _TITAN or via USB connection
4 touch-sensitive encoders allow you to draw automation into your DAW
True bypass completely removes the circuit from your signal path
Switchable side chain filters for fine-tuning how the compressor reacts to bass frequencies
Compatible with any WesAudio NG500 chassis and many standard 500 series racks
₹ 157200
2 x 1/4″ Hi-Z Instrument/Line Inputs and 4 Line/Monitor Outputs, 2 Headphone Outs
24-Bit / 192 kHz AD/DA Conversion, Touchscreen UI, Mixing Console with DSP
4 Mixers, Talkback, Monitor Control
Pre-FX and Post-FX Recording and MIDI I/O, ADAT / S/PDIF, and AES67
Intuitive touchscreen user interface
DSP processing (EQ, dynamics, reverb)
4 independent mixers with integrated talkback
₹ 169900₹ 199000
Neumann KH120 has fully documented extensive mounting hardware range
More flexibility in more diverse locations and backward compatibility to previous products
Easy, advanced planning for installations
Display dimmer and ground lift
₹ 206000
Legendary 3-band EQ design with iconic Neve sound.
High-frequency control with +/-16dB shelving at 12kHz.
Highpass filter with selectable slopes (18dB/octave) at 50Hz, 80Hz, 160Hz, and 300Hz.
Midrange control with +/-18dB peaking and fixed Q at various frequencies.
Low-frequency control with +/-16dB shelving at 35Hz, 60Hz, 110Hz, and 220Hz.
Compact 500 Series format for easy integration.
Signal presence LED for monitoring input level.
Audio Processing Insert design for use with 1073LB mic preamp.
Ideal for adding warmth, depth, and character to various instruments and vocals.
Captures the essence of the classic Neve 1073 EQ circuit.
₹ 214045
Neumann U87ai includes a large diaphragm FET condenser microphone and a pressure-gradient transducer with a double membrane capsule.
The studio microphone is traditional.
Three directional features: Omni, Cardioid, and Figure 8
Switchable low-frequency roll-off
Switchable 10 dB pre-attenuation.
₹ 272990₹ 289900
100% analog device with +24dBu of headroom.
Full digital control, automation, and recall via companion plug-in.
Relative stereo channel linking with separate L/R settings.
Mid-side operation for independent side and mid settings.
Selectable output stages: normal (electronically balanced) and IRON (transformer balanced).
₹ 326900